|
|
|
|
|
|
Snow Performance - Gas Stage 1 Boost Cooler N/A
|
List Price: $315.79
Our Price: $300.00
|
|
|
Snow Part # 20002 The gasoline Stage 1 Boost Cooler N/A™ kit is available for naturally aspirated applications that don't utilize a MAF sensor. Operation is very simple, the system starts injecting when the vacuum switch reaches the user-adjustable point and it injects a fixed amount of fluid through the nozzle until the switch opens again. This makes it a good choice for naturally aspirated cars looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user-chosen switch, such as a full throttle switch, etc. Now with Lifetime Warranty - please see details.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 1 Boost Cooler
|
List Price: $315.79
Our Price: $300.00
|
|
|
Snow Part # 20001 The gasoline Stage 1 Boost Cooler™ kit is available for forced induction applications that are either fuel injected or carbureted. Operation is very simple: the system starts injecting when the boost switch reaches the user-adjustable point and it injects a fixed amount of fluid through the nozzle until the switch opens again. This makes it a good choice for low to medium boost setups looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user-chosen switch, such as a full throttle switch, etc. Now with Lifetime Warranty - please see details.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: Boost Cooler - Universal
|
|
|
Snow Part # 20010 This kit uses manifold boost pressure to determine when and how much fluid to inject. Proportionally injecting according to boost pressure gives accurate delivery of water-methanol and allows the most cooling and performance improvement over a wide range. More power and driveability is the result. It can be used on any forced induction engine: carbureted, fuel injected, turbocharged, positive displacement or centrifugal blowers.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: MAF Boost Cooler
|
List Price: $510.53
Our Price: $485.00
|
|
|
Snow Part # 20011 Gas Stage 2 MAF Boost Cooler - This kit uses the 0 to 5 Volt output signal from the Mass Air Flow sensor on many fuel injected vehicles. This means that any vehicle with a MAF (with a 0-5V output signal) can use this kit, whether they are naturally aspirated or forced induction. If the application is forced induction, it can be used with very fast-spooling turbos, or positive displacement blowers. It is easier to set up with the positive displacement blowers with a MAF signal because it is more progressive in nature vs. the boost pressure signal on those applications. This allows for the accurate injection over a wide range. The result is excellent power and driveability. Now with Lifetime Warranty - please see details
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: GM MAF Boost Cooler
|
List Price: $510.53
Our Price: $485.00
|
|
|
Snow Part # 20012 Gas Stage 2 for GM MAF Boost Cooler - Temporarily out of stock. This kit uses the unique GM MAF frequency Hz output signal (on most 1994 and new GM vehicles) instead of 0-5 volts. Perfect for naturally aspirated applications and forced induction applications that build boost quickly at lower rpms. This allows for the most accurate delivery of water-methanol and allows the most cooling and performance improvement over the widest range. More power and driveability is the result. Now with Lifetime Warranty - please see details.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: GM MAF Low Frequency Boost Cooler
|
List Price: $510.53
Our Price: $485.00
|
|
|
Snow Part # 20013 Gas Stage 2 for GM MAF Low Frequency Boost Cooler - Temporarily out of stock. This kit uses the unique LOW frequency Hz output signal on many GM vehicles from 1986-1993. Perfect for naturally aspirated and forced induction applications that build boost quickly at lower rpms. This allows for the most accurate delivery of water-methanol and allows the most cooling and performance improvement over the widest range. More power and driveability is the result. Now with Lifetime Warranty - please see details.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: Naturally Aspirated
|
List Price: $510.53
Our Price: $485.00
|
|
|
Snow Part # 20020 Gas Stage 2 Boost Cooler for N/A - This kit uses a progressive controller that proportionally injects more or less according to manifold vacuum. Start and full points are adjustable for engagement and delivery curve, to match what the engine requires. High compression modified engines can gain performance through cooler intake charges and the large increase in octane and detonation suppression. It can also be geared towards fuel economy and using lower grades of gasoline.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: 2.0T FSI Boost Cooler
|
List Price: $510.53
Our Price: $485.00
|
|
|
Snow Part # 20012 Gas Stage 2 2.0T FSI This kit features an optimized hardware package specifically for VW and Audi 2.0T FSI vehicles. The system utilizes a special controller that is designed to read the unique digital MAF sensor output signal. Utilizing your factory washer reservoir to hold the fluid for the system saves room and maximizes fluid capacity without giving up your windshield washer function. Now with Lifetime Warranty - please see details.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: Corvette GM MAF Boost Cooler
|
List Price: $510.53
Our Price: $485.00
|
|
|
Snow Part # 20012 Gas Stage 2 for Corvette GM MAF Boost Cooler - Temporarily out of stock. This kit uses the unique GM MAF frequency Hz output signal (on most 1994 and new GM vehicles) instead of 0-5 volts. Perfect for naturally aspirated applications and forced induction applications that build boost quickly at lower rpms. This allows for the most accurate delivery of water-methanol and allows the most cooling and performance improvement over the widest range. More power and driveability is the result. Now with Lifetime Warranty - please see details.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 3: Boost Cooler - Mustang
|
List Price: $630.00
Our Price: $599.00
|
|
|
Snow's 20130 GT Gas Stage 3 Boost Cooler® for Mustangs is unmatched for accuracy and adjustability in water-methanol injection systems. This system can be used on '05+ Mustang - naturally aspirated or forced induction.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 3: Boost Cooler Universal
|
List Price: $721.05
Our Price: $689.00
|
|
|
Snow Part # 20100 The Gas Stage 3 Boost Cooler is unmatched for accuracy and adjustability in water-methanol injection systems. This system can be used on ANY EFI engine - naturally aspirated or forced induction, and any forced induction application.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 3: MPG MAX Boost Cooler
|
List Price: $763.16
Our Price: $725.00
|
|
|
Snow Part # 20150 Gas Stage 3 MPG MAX Boost Cooler - The MPG MAX® Stage 3 Boost Cooler® is unmatched for increases in Fuel Economy AND Power in water-methanol injection systems. Key to this is accuracy and adjustability designed into the system. This Boost Cooler® can be used on ANY EFI engine (naturally aspirated or forced induction) and any forced induction application (EFI or Carbed).
|
|
|
|
