|
|
|
|
|
|
Linear Logic - Accessory OBDII Cable for Scan Gauge II
|
|
|
Scangauge OBDII Cable Spare
|
|
|
|
|
|
|
|
|
|
PLX Devices - Bosch Wideband Oxygen Sensor Harness Type B for SM-AFR (Square style)
|
List Price: $45.00
Our Price: $42.75
|
|
|
This is a replacement part for use with the PLX SM-AFR wideband unit with type B connector end
|
|
|
|
|
|
|
|
|
|
PLX Devices - Kiwi MPG Fuel Trip Computer & Scan tool
|
List Price: $99.99
Our Price: $89.00
Sale Price: $79.99
|
|
|
Kiwi MPG makes monitoring your MPG simple and affordable. Instantaneous MPG, Trip MPG, engine check, scan tool, and More!
|
|
|
|
|
|
|
|
|
|
PLX Devices - Kiwi WiFi, Wireless iPhone / iPod Interface
|
List Price: $159.99
Our Price: $149.99
Sale Price: $134.99
|
|
|
Turn your iPhone / iPod Touch into: Engine Check Scan Tool MPG and Fuel Economy Gauges Real-time Engine Sensors Data Logger Customizable Gauges. Completely Wireless!
|
|
|
|
|
|
|
|
|
|
Linear Logic - ScanGauge II OBDII Digital Automotive Computer
|
List Price: $169.95
Our Price: $159.95
|
|
|
The Ultra Compact, 3-in-one Automotive Computer
|
|
|
|
|
|
|
|
|
|
PLX Devices - Kiwi 3-In-1 Fuel Trip Computer
|
|
|
The Kiwi Fuel Saver System works by analyzing driving habits and teaches how to drive green. Save up to 30% on gas while reducing your carbon footprint!
|
|
|
|
|
|
|
|
|
|
Snow Performance - VC MAF Universal
|
List Price: $215.79
Our Price: $205.00
|
|
|
Snow Part # 60020 VC MAF Universal
|
|
|
|
|
|
|
|
|
|
PLX Devices - Kiwi WiFi + iMFD Premiere iPhone/iPod touch Wireless Interface w/ iMFD Input
|
|
|
PLX Sensor Integration + Turn your iPhone / iPod Touch into: OBDII Engine Check Scan Tool MPG and Fuel Economy Gauges Real-time Engine Sensors Data Logger Customizable Gauges. Completely Wireless!
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 1 Boost Cooler
|
List Price: $315.79
Our Price: $300.00
|
|
|
Snow Part # 20001 The gasoline Stage 1 Boost Cooler™ kit is available for forced induction applications that are either fuel injected or carbureted. Operation is very simple: the system starts injecting when the boost switch reaches the user-adjustable point and it injects a fixed amount of fluid through the nozzle until the switch opens again. This makes it a good choice for low to medium boost setups looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user-chosen switch, such as a full throttle switch, etc. Now with Lifetime Warranty - please see details.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Diesel Stage 3 Controller UPGRADE
|
List Price: $400.00
Our Price: $380.00
|
|
|
Snow Part # 60001 Diesel Stage 3 - New from Snow Performance is the only system proven to increase fuel economy in all load states – empty or while towing. Special mapping and the most sophisticated 2d digital controller available result in 1-3 MPG increases! The MPG-MAX™ system does not require a sustained high load state in order to provide maximum fuel economy gains. The MPG-MAX™ system uses a new injection management controller that allows for a small, steady spray of water/methanol to be injected across the entire power curve – even while in cruise. This provides an increase in combustion efficiency which provides more power without injecting more diesel fuel. This increase in efficiency translates into an increase in fuel economy. Typical fuel economy increases are 10%-15% or 1-3 MPG.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Diesel Stage 3: MPG MAX Controller UPGRADE
|
List Price: $415.79
Our Price: $395.00
|
|
|
Snow Part # 60003 Diesel Stage 3 MPG MAX - New from Snow Performance is the only system proven to increase fuel economy in all load states – empty or while towing. Special mapping and the most sophisticated 2d digital controller available result in 1-3 MPG increases! The MPG-MAX™ system does not require a sustained high load state in order to provide maximum fuel economy gains. The MPG-MAX™ system uses a new injection management controller that allows for a small, steady spray of water/methanol to be injected across the entire power curve – even while in cruise. This provides an increase in combustion efficiency which provides more power without injecting more diesel fuel. This increase in efficiency translates into an increase in fuel economy. Typical fuel economy increases are 10%-15% or 1-3 MPG.
|
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 3 MPG MAX UPGRADE (with nozzle and controller, etc)
|
List Price: $490.00
Our Price: $459.00
|
|
|
Snow Part # 60006 Gas Stage 3 MPG MAX UPGRADE (with nozzle and controller, etc)
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: Mitsubishi Evolution
|
List Price: $500.00
Our Price: $475.00
|
|
|
Snow Part # 20010_EVO for Mitsubishi Evolution - This kit uses manifold boost pressure to determine when and how much fluid to inject. Proportionally injecting according to boost pressure gives accurate delivery of water-methanol and allows the most cooling and performance improvement over a wide range. More power and driveability is the result. It can be used on any forced induction engine: carbureted, fuel injected, turbocharged, positive displacement or centrifugal blowers. The most suitable are the centrifugal supercharged and turbocharged engines, as they build boost is a more progressive manner concerning water-methanol injection. The positive displacement blower engines will work, but it might take a bit more work to dial in the delivery. For higher boost applications (over 25psi), the controller can be upgraded to our VC100 unit. Now with Lifetime Warranty - please see details.
|
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: Dodge SRT-4
|
List Price: $500.00
Our Price: $475.00
|
|
|
Snow Part # 20010_SRT Gas Stage 2 for Chrysler SRT-4 - This kit offers a huge increase in power in the SRT-4 by delivering the appropriate and maximum amount of fluid over a wide range of engine conditions. The Digital Variable Control unit proportionally injects more or less water-methanol according to input signals from manifold pressure. This allows more to be injected at higher rpms and loadings when more fluid can be utilized. More power over a wider range and better drivability is the result. 20% increases in horsepower typical.
|
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: 300Z TT Boost Cooler
|
List Price: $500.00
Our Price: $475.00
|
|
|
Snow Part # 20010_300zTT for Mitsubishi 300z TT - This kit uses manifold boost pressure to determine when and how much fluid to inject. Proportionally injecting according to boost pressure gives accurate delivery of water-methanol and allows the most cooling and performance improvement over a wide range. More power and driveability is the result. It can be used on any forced induction engine: carbureted, fuel injected, turbocharged, positive displacement or centrifugal blowers. The most suitable are the centrifugal supercharged and turbocharged engines, as they build boost is a more progressive manner concerning water-methanol injection. The positive displacement blower engines will work, but it might take a bit more work to dial in the delivery. For higher boost applications (over 25psi), the controller can be upgraded to our VC100 unit. Now with Lifetime Warranty - please see details.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: MAF Boost Cooler
|
List Price: $510.53
Our Price: $485.00
|
|
|
Snow Part # 20011 Gas Stage 2 MAF Boost Cooler - This kit uses the 0 to 5 Volt output signal from the Mass Air Flow sensor on many fuel injected vehicles. This means that any vehicle with a MAF (with a 0-5V output signal) can use this kit, whether they are naturally aspirated or forced induction. If the application is forced induction, it can be used with very fast-spooling turbos, or positive displacement blowers. It is easier to set up with the positive displacement blowers with a MAF signal because it is more progressive in nature vs. the boost pressure signal on those applications. This allows for the accurate injection over a wide range. The result is excellent power and driveability. Now with Lifetime Warranty - please see details
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: GM MAF Boost Cooler
|
List Price: $510.53
Our Price: $485.00
|
|
|
Snow Part # 20012 Gas Stage 2 for GM MAF Boost Cooler - Temporarily out of stock. This kit uses the unique GM MAF frequency Hz output signal (on most 1994 and new GM vehicles) instead of 0-5 volts. Perfect for naturally aspirated applications and forced induction applications that build boost quickly at lower rpms. This allows for the most accurate delivery of water-methanol and allows the most cooling and performance improvement over the widest range. More power and driveability is the result. Now with Lifetime Warranty - please see details.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: GM MAF Low Frequency Boost Cooler
|
List Price: $510.53
Our Price: $485.00
|
|
|
Snow Part # 20013 Gas Stage 2 for GM MAF Low Frequency Boost Cooler - Temporarily out of stock. This kit uses the unique LOW frequency Hz output signal on many GM vehicles from 1986-1993. Perfect for naturally aspirated and forced induction applications that build boost quickly at lower rpms. This allows for the most accurate delivery of water-methanol and allows the most cooling and performance improvement over the widest range. More power and driveability is the result. Now with Lifetime Warranty - please see details.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: Naturally Aspirated
|
List Price: $510.53
Our Price: $485.00
|
|
|
Snow Part # 20020 Gas Stage 2 Boost Cooler for N/A - This kit uses a progressive controller that proportionally injects more or less according to manifold vacuum. Start and full points are adjustable for engagement and delivery curve, to match what the engine requires. High compression modified engines can gain performance through cooler intake charges and the large increase in octane and detonation suppression. It can also be geared towards fuel economy and using lower grades of gasoline.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: VW 1.8 Turbo
|
List Price: $510.53
Our Price: $485.00
|
|
|
Snow Part # 20011_1.8T Gas Stage 2 for VW 1.8 Turbo - Tired of your factory SMIC heat soaking? Want to push your 1.8T without the fear of detonation? Get better IAT reduction and detonation control with this new 1.8T-specific kit. The Digital Variable Control unit proportionally injects more or less water-methanol according to input signals from your factory Mass Air Flow sensor. This offers accurate injection for small, quick spooling turbos. Enjoy more power over a wide range with smooth, seamless delivery. Now with Lifetime Warranty - please see details.
|
|
|
|
