|
|
|
|
|
|
Snow Performance - Gas Stage 1 Boost Cooler N/A
|
List Price: $315.79
Our Price: $300.00
|
|
|
Snow Part # 20002 The gasoline Stage 1 Boost Cooler N/A™ kit is available for naturally aspirated applications that don't utilize a MAF sensor. Operation is very simple, the system starts injecting when the vacuum switch reaches the user-adjustable point and it injects a fixed amount of fluid through the nozzle until the switch opens again. This makes it a good choice for naturally aspirated cars looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user-chosen switch, such as a full throttle switch, etc. Now with Lifetime Warranty - please see details.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 1 Boost Cooler
|
List Price: $315.79
Our Price: $300.00
|
|
|
Snow Part # 20001 The gasoline Stage 1 Boost Cooler™ kit is available for forced induction applications that are either fuel injected or carbureted. Operation is very simple: the system starts injecting when the boost switch reaches the user-adjustable point and it injects a fixed amount of fluid through the nozzle until the switch opens again. This makes it a good choice for low to medium boost setups looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user-chosen switch, such as a full throttle switch, etc. Now with Lifetime Warranty - please see details.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: Boost Cooler - Universal
|
|
|
Snow Part # 20010 This kit uses manifold boost pressure to determine when and how much fluid to inject. Proportionally injecting according to boost pressure gives accurate delivery of water-methanol and allows the most cooling and performance improvement over a wide range. More power and driveability is the result. It can be used on any forced induction engine: carbureted, fuel injected, turbocharged, positive displacement or centrifugal blowers.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 3 Controller UPGRADE
|
List Price: $400.00
Our Price: $380.00
|
|
|
Snow Part # 60060 Stage 3 Gas Controller UPGRADE
|
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: Mitsubishi Evolution
|
List Price: $500.00
Our Price: $475.00
|
|
|
Snow Part # 20010_EVO for Mitsubishi Evolution - This kit uses manifold boost pressure to determine when and how much fluid to inject. Proportionally injecting according to boost pressure gives accurate delivery of water-methanol and allows the most cooling and performance improvement over a wide range. More power and driveability is the result. It can be used on any forced induction engine: carbureted, fuel injected, turbocharged, positive displacement or centrifugal blowers. The most suitable are the centrifugal supercharged and turbocharged engines, as they build boost is a more progressive manner concerning water-methanol injection. The positive displacement blower engines will work, but it might take a bit more work to dial in the delivery. For higher boost applications (over 25psi), the controller can be upgraded to our VC100 unit. Now with Lifetime Warranty - please see details.
|
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: Dodge SRT-4
|
List Price: $500.00
Our Price: $475.00
|
|
|
Snow Part # 20010_SRT Gas Stage 2 for Chrysler SRT-4 - This kit offers a huge increase in power in the SRT-4 by delivering the appropriate and maximum amount of fluid over a wide range of engine conditions. The Digital Variable Control unit proportionally injects more or less water-methanol according to input signals from manifold pressure. This allows more to be injected at higher rpms and loadings when more fluid can be utilized. More power over a wider range and better drivability is the result. 20% increases in horsepower typical.
|
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: 300Z TT Boost Cooler
|
List Price: $500.00
Our Price: $475.00
|
|
|
Snow Part # 20010_300zTT for Mitsubishi 300z TT - This kit uses manifold boost pressure to determine when and how much fluid to inject. Proportionally injecting according to boost pressure gives accurate delivery of water-methanol and allows the most cooling and performance improvement over a wide range. More power and driveability is the result. It can be used on any forced induction engine: carbureted, fuel injected, turbocharged, positive displacement or centrifugal blowers. The most suitable are the centrifugal supercharged and turbocharged engines, as they build boost is a more progressive manner concerning water-methanol injection. The positive displacement blower engines will work, but it might take a bit more work to dial in the delivery. For higher boost applications (over 25psi), the controller can be upgraded to our VC100 unit. Now with Lifetime Warranty - please see details.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: MAF Boost Cooler
|
List Price: $510.53
Our Price: $485.00
|
|
|
Snow Part # 20011 Gas Stage 2 MAF Boost Cooler - This kit uses the 0 to 5 Volt output signal from the Mass Air Flow sensor on many fuel injected vehicles. This means that any vehicle with a MAF (with a 0-5V output signal) can use this kit, whether they are naturally aspirated or forced induction. If the application is forced induction, it can be used with very fast-spooling turbos, or positive displacement blowers. It is easier to set up with the positive displacement blowers with a MAF signal because it is more progressive in nature vs. the boost pressure signal on those applications. This allows for the accurate injection over a wide range. The result is excellent power and driveability. Now with Lifetime Warranty - please see details
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: GM MAF Boost Cooler
|
List Price: $510.53
Our Price: $485.00
|
|
|
Snow Part # 20012 Gas Stage 2 for GM MAF Boost Cooler - Temporarily out of stock. This kit uses the unique GM MAF frequency Hz output signal (on most 1994 and new GM vehicles) instead of 0-5 volts. Perfect for naturally aspirated applications and forced induction applications that build boost quickly at lower rpms. This allows for the most accurate delivery of water-methanol and allows the most cooling and performance improvement over the widest range. More power and driveability is the result. Now with Lifetime Warranty - please see details.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: GM MAF Low Frequency Boost Cooler
|
List Price: $510.53
Our Price: $485.00
|
|
|
Snow Part # 20013 Gas Stage 2 for GM MAF Low Frequency Boost Cooler - Temporarily out of stock. This kit uses the unique LOW frequency Hz output signal on many GM vehicles from 1986-1993. Perfect for naturally aspirated and forced induction applications that build boost quickly at lower rpms. This allows for the most accurate delivery of water-methanol and allows the most cooling and performance improvement over the widest range. More power and driveability is the result. Now with Lifetime Warranty - please see details.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: Naturally Aspirated
|
List Price: $510.53
Our Price: $485.00
|
|
|
Snow Part # 20020 Gas Stage 2 Boost Cooler for N/A - This kit uses a progressive controller that proportionally injects more or less according to manifold vacuum. Start and full points are adjustable for engagement and delivery curve, to match what the engine requires. High compression modified engines can gain performance through cooler intake charges and the large increase in octane and detonation suppression. It can also be geared towards fuel economy and using lower grades of gasoline.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: VW 1.8 Turbo
|
List Price: $510.53
Our Price: $485.00
|
|
|
Snow Part # 20011_1.8T Gas Stage 2 for VW 1.8 Turbo - Tired of your factory SMIC heat soaking? Want to push your 1.8T without the fear of detonation? Get better IAT reduction and detonation control with this new 1.8T-specific kit. The Digital Variable Control unit proportionally injects more or less water-methanol according to input signals from your factory Mass Air Flow sensor. This offers accurate injection for small, quick spooling turbos. Enjoy more power over a wide range with smooth, seamless delivery. Now with Lifetime Warranty - please see details.
|
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: Subaru WRX/Sti
|
List Price: $510.53
Our Price: $485.00
|
|
|
Snow Part # 20011_WRX Gas Stage 2 for Subaru WRX/Sti - For Subaru WRX’s utilizing the stock 0-5 volt output MAF sensor. Also works on STi’s. The Digital Variable Control unit proportionally injects more or less water-methanol according to input signals from the mass air flow sensor. More power over a wider range and better drivability is the result. 20% increases in Horsepower typical.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: Chevy Cobalt SS
|
List Price: $510.53
Our Price: $485.00
|
|
|
Snow Part # 20012_SS Gas Stage 2 for Chevy Cobalt SS - Temporarily out of stock. Specifically for the Chevy Cobalt SS. The Digital Variable Control unit proportionally injects more or less water-methanol according to input signals from the mass air flow sensor. Designed for use with the Cobalt SS Eaton supercharger. More power over a wider range and better drivability over the typical boost actuated system.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: Buick Grand National
|
List Price: $510.53
Our Price: $485.00
|
|
|
Snow Part # 20013_GN Gas Stage 2 for Buick Grand National - This kit uses manifold boost pressure to determine when and how much fluid to inject. Proportionally injecting according to boost pressure gives accurate delivery of water-methanol and allows the most cooling and performance improvement over a wide range. More power and driveability is the result. It can be used on any forced induction engine: carbureted, fuel injected, turbocharged, positive displacement or centrifugal blowers. The most suitable are the centrifugal supercharged and turbocharged engines, as they build boost is a more progressive manner concerning water-methanol injection. The positive displacement blower engines will work, but it might take a bit more work to dial in the delivery. For higher boost applications (over 25psi), the controller can be upgraded to our VC100 unit. Now with Lifetime Warranty - please see details.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: 2.0T FSI Boost Cooler
|
List Price: $510.53
Our Price: $485.00
|
|
|
Snow Part # 20012 Gas Stage 2 2.0T FSI This kit features an optimized hardware package specifically for VW and Audi 2.0T FSI vehicles. The system utilizes a special controller that is designed to read the unique digital MAF sensor output signal. Utilizing your factory washer reservoir to hold the fluid for the system saves room and maximizes fluid capacity without giving up your windshield washer function. Now with Lifetime Warranty - please see details.
|
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: Corvette GM MAF Boost Cooler
|
List Price: $510.53
Our Price: $485.00
|
|
|
Snow Part # 20012 Gas Stage 2 for Corvette GM MAF Boost Cooler - Temporarily out of stock. This kit uses the unique GM MAF frequency Hz output signal (on most 1994 and new GM vehicles) instead of 0-5 volts. Perfect for naturally aspirated applications and forced induction applications that build boost quickly at lower rpms. This allows for the most accurate delivery of water-methanol and allows the most cooling and performance improvement over the widest range. More power and driveability is the result. Now with Lifetime Warranty - please see details.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: Naturally Aspirated Muscle Car
|
List Price: $552.63
Our Price: $525.00
|
|
|
Snow Part # 20020_MC Gas Stage 2 Boost Cooler for Muscle Car N/A - Run 11:1 to 13:1 compression ratio (or more!) on pump gas!! Increase your pump gas octane by 20-25 points and make more power. More power and efficiency with cooler running for your naturally aspirated V8 Muscle Car.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: Muscle Car, Naturally Aspirated, Carbureted V8, Dom. Carb
|
List Price: $578.95
Our Price: $550.00
|
|
|
Snow Part # 20020_MC_DOM Gas Stage 2 Boost Cooler for Muscle Car, Naturally Aspirated, Dominator Carb V8 - Run 11:1 to 13:1 compression ratio (or more!) on pump gas!! Increase your pump gas octane by 20-25 points and make more power. More power and efficiency with cooler running for your naturally aspirated V8 Muscle Car.
|
|
|
|
|
|
|
|
|
|
Snow Performance - Gas Stage 2: Muscle Car, Naturally Aspirated, Carbureted V8, Dual Carb
|
List Price: $605.26
Our Price: $575.00
|
|
|
Snow Part # 20020_MC_2 Gas Stage 2 Boost Cooler for Muscle Car, Naturally Aspirated, Dual-Carbureted V8 - Run 11:1 to 13:1 compression ratio (or more!) on pump gas!! Increase your pump gas octane by 20-25 points and make more power. More power and efficiency with cooler running for your naturally aspirated V8 Muscle Car.
|
|
|
|
